Make humming birds / sunbirds feeder

Do it yourself: Sunbirds and Hummingbirds feeder

by Alon Friedman

Why buy one? if you can build it with re-used products

This blog will instruct you how to build Sunbirds or Hummingbirds feeder and provides Solutions to the common pest's problems: Ants and Wasps.

You can skip right to:

· Keeping Wasps and bees away from your hummingbirds / sunbirds feeder

· Keeping Ants away from your hummingbirds / sunbirds feeder

Building the feeder from re used products

Here is what you need:

•A 1/2 liter (about 16.9 oz) Plastic bottle (of water or soda).

• Small shallow plastic box, whose cover can support the weight of the filled box. I used a plastic food box, cosmetics box and a box that contained a pack of 10 C.D box (the 25 pack is too big and deep).

• Glue gun

• Thin Red Polypropylene Sheet (You can get it at Office depot or any other similar shop). You can use other colors, but the red color seams to be the best attractant for nectar feeding birds
• An electric soldering iron

If you do not have an electric soldering iron you can use the two next items:

• Large paper clip (not those with the colorful plastic cover) or a metal wire

• Fire source (cocking stove or any other)

Instructions

First cut off a part of the bottle head. you can do it using an electric soldering iron or heated paper clip.

The cut should be done a little above the "holding ring" or the "handle"

use an electric soldering iron or Straighten one side of a paper clip and heat it using a fire source

Start heat-cutting through the plastic (if you using the paper clip you will need a few rounds of heating-cutting).

Draw a circle on the box cover          (you can use the bottle top as a pattern)     Heat-cut the circle out

Push the bottle holding ring through the hole; if it barely goes in – it is perfect!
If it doesn't go in at all – widen the hole a little

Make few little holes at the cover (for the birds beak) – it should be up to 0.5 cm (0.2 inches) wide.

Use the glue gun to attach the "holding ring" to the cover (at the "inner" side of the cover) and push the cover up (attaching the cover to the holding ring)
Then apply the glue to the other side of the cover (for better holding and sealing)

Making the FLOWERS

The idea is to mimic a real flower. If the flower doen't look real enough, the birds will have a hard time figuring out that the device is a food source.
After the first few successful encounters with the feeder, they will understand the concept, and you could use some less realistic "flowers" (or even none). But for the first encounter it is very important.
Nectar-feeding birds are mostly attracted to the red flowers: so let's make it easy for them.
 I used a thin Red Polypropylene Sheet.

For your ease, download the pattern Word file  and print it on an A4 paper. Lay the Polypropylene sheet on the printed paper. The Polypropylene sheet Is partly transparent - you will see the pattern beneath, draw it and then cut it. Pull leaf 1 on top of leaf 2 and use a stapler to attach them together. Be sure to create a hole in the center.

The next stage will be to glue the flowers on the top of the cover, just above the holes. Make sure not to block the holes with the glue.

The hanger:
 bend a metal wire (as shown) and tape it to the bottle

 We do not have Hummingbirds in Israel, but we have one species of Sunbird (called Nectarinia Osea).

The device is now complete for hummingbirds. However, sunbirds (which share a similar diet and appearance as hummingbirds) prefer to stand on a twig while eating.
To make the device more attractive to them, I glued a twig near the flower (using a glue gun)

That is it!  The feeder is ready for use

The feeding solution
Use a ratio of 1 part sugar and 4 parts of water. The sugar dissolves faster in hot water, which is the allowed to cool before use.I use 1 cup of sugar and 4 cups of water (store the rest of the solution in the fridge for the next refill)

You should replace the solution and wash the feeder every few days. It gets infected with fungi (the birds transfer it with their beaks, so don’t waste time boiling the solution or sterilizing the feeder)

Here are photographs of the encounters (the sunbird Nectarinia Osea)

click on the pictures to enlarge

and on other feeders

made of a a 10 C.D. pack                                              made of a cosmetics cream box
some pictures of the birds (stsanding on the feeder's twig)

Nectarinia Osea (male)

Nectarinia Osea (male)

Nectarinia Osea (female)